Images are representations only.

Kayden CLASSIC 812 Spare Sensor, Flanged, P12 Series

Brand: Kayden Instruments
  • Replacement Sensor for Kayden CLASSIC 812 Series
  • Process Connection - Flanged
    • Raised Face - RF
    • Ring-Type Joint - RTJ
    • Flange Size
      • 1-1/2", DN 40
      • 2", DN 50
      • 3", DN 80
      • 4", DN 100
    • ANSI Rating
      • 150#
      • 300#
      • 600#
      • 900#
  • Insertion 'U' Length
    • Available in 1/2" or 1 cm increments
    • Minimum 2.5" to Maximum 120" (6.0 - 305 cm)
  • Temperature Range - Sensor
    • -45° to 200° C
    • -50° to 392° F
  • Adjustable Set Point Range
    • 0 - 254 feet/s
    • 0 - 77 meters/s
  • Materials of Construction - Sensor and Flange
    • 316/316L Stainless Steel
    • Hastelloy C-276
    • Titanium Grade 2
    • Other Metals Available
  • Sensor Connection
    • Molex 8-Pin
  • Approvals (with Classic 812 Switch)
    • UL, CSA, CRN, Single Seal, NACE
  • Replacement Sensor for Kayden CLASSIC 812 Series
  • Process Connection - Flanged
    • Raised Face - RF
    • Ring-Type Joint - RTJ
    • Flange Size
      • 1-1/2", DN 40
      • 2", DN 50
      • 3", DN 80
      • 4", DN 100
    • ANSI Rating
      • 150#
      • 300#
      • 600#
      • 900#
  • Insertion 'U' Length
    • Available in 1/2" or 1 cm increments
    • Minimum 2.5" to Maximum 120" (6.0 - 305 cm)
  • Temperature Range - Sensor
    • -45° to 200° C
    • -50° to 392° F
  • Adjustable Set Point Range
    • 0 - 254 feet/s
    • 0 - 77 meters/s
  • Materials of Construction - Sensor and Flange
    • 316/316L Stainless Steel
    • Hastelloy C-276
    • Titanium Grade 2
    • Other Metals Available
  • Sensor Connection
    • Molex 8-Pin
  • Approvals (with Classic 812 Switch)
    • UL, CSA, CRN, Single Seal, NACE
Close
Close

Specifications

Brand

Applications

  • Flow
  • Level
  • Interface

Principle of Operation

  • Thermal, Calorimetric

Insertion 'U' Length - Custom

  • 6.4 cm to 305 cm (in 1 cm increments)
  • 2.5” to 120” (in 1/2” increments)

Flange Type

  • RF - Raised Face
  • RTJ - Ring Typical Joint

Flange Class

  • 150#
  • 300#
  • 600#
  • 900#

Flange Size

  • 1" DN 25
  • 1-1/2" DN 40
  • 2" DN 50
  • 3" DN 80
  • 4" DN 100
  • 5" DN 125
  • 6" DN 150
  • 8" DN 200
  • 10 DN 250

Flange Material

  • 316, 316L Stainless Steel
  • Hastelloy C-276
  • Titanium Grade 2
  • Other metals available

Wetted Materials

  • 316, 316L Stainless Steel
  • Hastelloy C-276
  • Titanium Grade 2
  • Other Metals Available

Sensor Construction

  • All-Welded Construction

Operating Pressure Maximum - Sensor

  • Per Flange Rating, ASME B16.5

Operating Temperature - Sensor

  • -55° to 200° C
  • -67° to 392° F

Sensor, Probe Style

  • Insertion

Switch Point Range

  • Air & Gases: 0.25 to 200 sfps, 0.08 to 60 smps - Standard Condition 21° C (70° F) at 14.7 psi (1 Atm)
  • Hydrocarbon-based Liquids: 0.01 - 5.0 fps, 0.003 - 1.50 mps
  • Water-based Liquids: 0.01 - 3.00 fps, 0.003 - 0.9 mps

Response Time

  • Approximately 0.5 to 30 seconds

Sensor, Probe to Electronics Connection Type

  • Molex 8-Pin

Accuracy

  • Flow Service: ± 1.0 % of Set Point Velocity over Operating Range of ± 28° C (± 50° F)
  • Level Service: ± 0.64 cm (0.25”)

Approvals & Certifications - CLASSIC 812 Series

  • CSA - Local (Sensor) Enclosure Flameproof: Class I, Div. 1, Groups B, C, D, Ex d IIB + H₂ AEx d IIB + H₂ (Class I, Zone 1, Group IIB + H₂) Temperature Code: T3 Enclosure Typical 4, IP55 Single Seal Approved Per ANSI/ISA 12.27.01-2003
  • CRN - Canadian Registration Numbers - 1” & 1-1/2” - Flanges Approved for All Provinces & Territories 812-RAA Series: CRN # 0F13787.2C 316, 316L Stainless Steel, Pipe NPS 1/2” Schedule 80 Code of Construction: ASME B31.3, Max.
  • CRN - Canadian Registration Numbers - 2” through 10” Flanges - Approved for All Provinces & Territories 812-RAA Series: CRN # 0F13773.2C 316, 316L Stainless Steel, Pipe NPS 3/4” Schedule 80 Code of Construction: ASME B31.3, Max.
Close